Blue Line Pir (11m x 11m)
The ISM-BLP1 Detector uses a high-density (77 zone) Fresnel lens designed to produce sharply-focused images
throughout the field of view providing superior response to intruders. Easy installation and flexible mounting options
provide state-of-the-art detection.
Coverage Pattern (Top View)
First Step Processing (FSP) almost instantly responds to human targets without producing false alarms from other
sources. FSP adjusts the detector's sensitivity based on signal amplitude, polarity, slope, and timing. This eliminates
the need for the installer to select the sensitivity level.
The externally-visible alarm LED can be disabled after installation.
The sealed optical chamber prevents drafts and insects from affecting the detector.
The detector adjusts its sensitivity so that it can identify human intruders at critical temperatures.
11 m x 11 m (35 ft x 35 ft) broad coverage
EN50131-2-2 Grade 2 compliant
First Step Processing (FSP)
Flexible mounting height from 2.3 m to 2.7 m (7.5 ft to 9 ft)
No range or height adjustments required
Installation-friendly two-piece design
Easy wiring access with plug-in terminals
Draft and insect immunity
Eight detection layers including optional look-down zone
The detector can be mounted:
On a flat wall (surface, semi-flush) with the optional B335 Swivel-mount Bracket, or with the optional B328
Gimbal-mount Bracket, In the junction of two perpendicular walls, or On the ceiling with the optional B338 Ceiling Mount Bracket.
Parts Included
Quant. Component
1 Detector
1 Hardware pack
1 Literature pack
Technical Specifications
Environmental Considerations
Designed to comply with EN50131-2-2 Environmental Class II, Security Grade 2
Relative Humidity: 0 to 85%, non-condensing
Temperature (operating):
-29°C to +49°C (-20°F to +120°F)
For UL Listed product installations,
0°C to +49°C (+32°F to +120°F)
Mechanical Properties
Color: White
Dimensions: 10.7 cm x 6.1 cm x 4.8 cm (4.2 in. x 2.4 in. x 1.9 in.)
Material: High-impact ABS plastic
Radio Frequency No alarm or setup on critical frequencies in the range
Interference (RFI) from 26 MHz to 950 MHz at field strengths less than
Immunity 50 V/m.
Digital Alarm: 5 V normally, grounded for 4 sec during alarm.
Relay: Solid state, supervised, Form A normally-closed (NC) contacts rated for 125 mA, 28 VDC, 3 W.
Tamper:
Normally-closed (NC) contacts (with cover on) rated at 28 VDC, 125 mA maximum.
Connect tamper circuit to 24-hour protection circuit.
Power Requirements
Current (Alarm): 18 mA
Current (Standby): 10 mA maximum at 12 VDC
Voltage (Operating): 10 VDC to 14 VDC
Ordering Information
ISM-BLP1 Blue Line PIR Detector ISM-BLP1
Accessories
ISM-BLA1-CC Blue Line Color Camera ISM-BLA1-CC-P Module (PAL format)
ISM-BLA1-LM Blue Line Nightlight Module ISM-BLA1-LM
ISM-BLA1-SM Blue Line Sounder Module ISM-BLA1-SM
B328 Gimbal-mount Bracket B328
Swiveling B335-3 low-profile mount B335-3
B338 universal ceiling mount B338
Blue Line Pir Data Sheet
