Blue Line Colour Camera Module
Includes video cable with BNC connector The ISM-BLA1-CC color camera modules attach to the Blue
Line detectors. These camera modules, available in either NTSC or PAL formats, are small, easy-to-mount, and
attractive. Set the camera to run continuously, or to run for either 15 sec or 90 sec when activated by the detector
alarm.
The ISM-BLA1-CC-P camera module provides a PAL video signal of 512 (H) x 582 (V) effective pixels with electronic
shutter speeds from 1/50 sec to 1/100000 sec.
The camera's field of view is 66° horizontal and 53° vertical.
The resulting viewable area depends on the installation height.
Video Connection
A video cable with a BNC connector at one end is supplied.
Connect this cable to up to 152 m (500 ft) of 75 O RG59/U or similar coaxial cable.
Parts Included
Quant. Component
1 Camera module
1 Mask
1 Hardware pack
1 Literature pack
Technical Specifications
Environmental Considerations
Complies with EN50131 Environmental Class II, Security Grade 2
Relative Humidity: 0 to 85%, non-condensing
Temperature (operating): -10°C to +49°C (+14°F to +120°F) For UL
Listed product installations, 0°C to +49°C (+32°F to +120°F)
Input
Alarm:
5 V normally from sensor digital alarm output, ground for 4 sec during alarm.
Mechanical Properties
Color: White
Dimensions: 5.6 cm x 6.1 cm x 4.8 cm (2.2 in. x 2.4 in. x 1.9 in.)
Material: High-impact ABS plastic
Radio Frequency In-No alarm or setup on critical frequencies in the range
terference (RFI) Im-from 26 MHz to 2 GHz at field strengths less than 30 V/
munity: m.
Outputs
Relay Timer: Selectable latch time of 15 sec or 90 sec.
Timed Relay:
Solid state, selectable supervised Form A normally-
closed (NC) or unsupervised Form B normally-open (NO)
contacts rated for 125 mA, 28 VDC, 3 W.
Tamper:
Normally-closed (NC) contacts (with cover on) rated at
28 VDC, 125 mA maximum. Connect to detector tamper
circuit.
Power Requirements
Current (Alarm): 115 mA when camera is on
Current (Standby): 5 mA maximum at 12 VDC
Voltage (Operating): 12 VDC nominal
ISM-BLA1-CC Blue Line Color Camera Modules | 3 ISM-BLA1-CC Blue Line Color Camera Modules | 3 Video
CCD: 8.5 mm (1/3-inch) color with an electronic shutter
Field of view:
Lens:
66° horizontal, 53° vertical
Resolution (horizontal):
3.6 mm fixed focal length lens
330 lines minimum at center of picture
Scanning System: 2:1 interlaced
Sensitivity: <3 lx
Signal: 75 O (NTSC or PAL)
Signal to Noise Ratio: 45 dB minimum
