Blue Line Night Light Module
the Blue Line ISM-BLA1-LM Nightlight Module attaches to the Blue Line detectors. When the detector senses a
presence, the module's LEDs light and provide illumination up to the equivalent of bright moonlight (0.1 cd at 30 cm
[1 ft] from the detector).
The Blue Line Nightlight Module mounts on top of and is wired to a Blue Line detector. This unique interface
between module and detector makes installation fast, easy, and inexpensive. Once the detector is mounted and wired
to the control panel, you simply add the module with no additional wiring needed.
Basic Operation
The nightlight module has a photo-sensor and four LEDs under a diffusing lens. It mounts on, draws its power from,
and is controlled by any Blue Line detector. Once installed and set, if the detector senses motion and the photo-sensor
does not detect light, the LEDs light.
The brightness level can be set for low or high by positioning jumper during module installation.
Modular construction fits all Blue Line detectors
High quality, affordable, and easy to install
Exterior switches control light duration (short or long) and on or off
.
Two installer-selectable brightness levels
.
Aesthetic design
The length of time the LEDs remain lit is set with an external switch on the side of the module. Short duration is
approximately 20 sec to 30 sec; while long duration is approximately 2 min to 4 min.
On-Off
Use the external On or Off switch on the side of the module to determine if the LEDs light when motion is detected.
Field Testing
Compatibility Information
The BLA1-LM Nightlight Module is compatible with the
following products:
Detectors BLD1 Blue Line TriTech® Detectors
BLD1-P Blue Line Pet Friendly® TriTech® Detectors
BLP1 Blue Line PIR Detector
BLP1-P Blue Line Pet Friendly® PIR Detector
BLQ1 Blue Line quad PIR Detector
Mounting Considerations
The nightlight module mounts on top of a Blue Line detector by removing the detector from its mounting base, installing
the module on the detector base, and reattaching the detector and the module lens. Ensure there is enough space
above the detector for the nightlight module.
Wiring Considerations
The three module wires attach to the terminal block of the Blue Line detector.
Parts Included
Quant. Component
1 Nightlight module
1 Test filter
1 Literature pack
Technical Specifications
Environmental Considerations
Complies with EN50131 Environmental Class II, Security Grade 2
Relative Humidity: Up to 95% non-condensing
Up to 85% for UL installations
Temperature (operating): -10°C to +49°C (+14°F to +120°F)
For UL Listed product installations,
0°C to +49°C (+32°F to +120°F)
Mechanical Properties
Color: White
Dimensions: 2.5 cm x 6.4 cm x 3.2 cm
(1.0 in. X 2.5 in. X 1.25 in.)
Material: High-impact ABS plastic
Output
Light Intensity: 0.1 cd at 30 cm (1 ft)
Power Requirements
Current Draw Brightness level set low: 40 mA
(LEDs lit): Brightness level set high: 75 mA
Standby Power:
No internal standby battery. Standby power must be
provided by the control unit or by a UL Listed burglary
power supply.
Ordering Information
ISM-BLA1-LM Blue Line Nightlight Module ISM-BLA1-LM
Fits all Blue Line detectors
Information courtesy Bosch Security Systems.
© Bosch Security Systems Inc. 2009
