FSH Flush mount drop bolt - Power To release

Important note on this product:

• This lock should not be used if there is no additional escape door in the room due to fire regulations.
• If the power supply / unit / cabling / control equipment or lock fails, the door remains locked and the door may have to be damaged or smashed to fix the lock.

 

• Internal IC circuits to protect drop bolt pin from damage
• Auto lock function
• Built-in metal oxide varistor (MOV) for surge protection
• Time delay setting at 0/3/6/10 secs
• Low power consumption
• Anodised aluminum body case
• 1 year warranty
• Power to release (PTR)
• Fire tested 4 hours (DB1260)

 

The FSH series of flush bolts are suitable for installation on all types of hinged doors including fully glazed. They have built
in intelligence to prevent locking if the doors are not correctly aligned with the keeper plate. The DB1260 model is slimline,
fire tested for 4 hours to both Australian and British test standards and can be supplied either power to lock (PTL) or power
to release (PTR). The devices can be inter-phased with building management and access control systems to control access
and egress to hinged doors including fire rated models (DB1260 models only).

 

PART No.	DB1260PTO (Power To Release)	DB1260PTL (Power To Lock)
FUNCTION	Slimline mortise mount drop bolt
HOLDING STRENGTH	Up to 300kg
VOLTAGE/CURRENT	12VDC 1.15A(in-rush) 250mA holding
APPROVALS	4 hour fire rated to A.S. and B.S. standards
MONITORING	Door sensor Remote release Bi-coloured LED Audible tone
ENVIRONMENTAL	L= 210 x W= 25 x D= 35mm